FAQ Page 1 - आरबीआय - Reserve Bank of India
IST,
Content Type:
Retail Direct Scheme
Nomination related queries
Domestic Deposits
II. Deposits of Non-Residents Indians (NRIs)
External Commercial Borrowings (ECB) and Trade Credits
G. END-USES
All you wanted to know about NBFCs
B. Entities Regulated by RBI and applicable regulations
Annual Return on Foreign Liabilities and Assets (FLA) under FEMA 1999
Some Useful Definitions
Ans:
Foreign Subsidiary: An Indian entity is called as a Foreign Subsidiary if a non-resident investor owns more than 50% of the voting power/equity capital OR where a non-resident investor and its subsidiary(s) combined own more than 50% of the voting power/equity capital of an Indian enterprise.
Foreign Associate: An Indian entity is called as Foreign Associate if non-resident investor owns at least 10% and no more than 50% of the voting power/equity capital OR where non-resident investor and its subsidiary(s) combined own at least 10% but no more than 50% of the voting power/equity capital of an Indian enterprise.
Special Purpose Vehicle: A special purpose Vehicle (SPV) is a legal entity (usually a limited company of some type or, sometimes, a limited partnership) created to fulfil narrow, specific or temporary objectives. SPV have little or no employment, or operations, or physical presence in the jurisdiction in which they are created by their parent enterprises, which are typically located in other jurisdictions (economies). They are often used as devices to raise capital or to hold assets and liabilities and usually do not undertake significant production.
Retail Direct Scheme
Investment and Account holdings related queries
While the primary auctions are conducted generally on specified days of the week as given in the table below, these days may differ due to holidays or other considerations. Half yearly indicative calendars are published on RBI website for Government of India’s dated securities and Sovereign Gold Bonds whereas quarterly indicative calendars are published for Treasury Bills and State Development loans. For details visit /en/web/rbi
| S. No. | Government security | Primary auction usually held on |
| 1 | Government of India Treasury Bills (T-Bills) | Wednesdays |
| 2 | Government of India dated securities (dated G-Sec) | Fridays |
| 3 | State Development Loans (SDLs) | Tuesdays |
| 4 | Sovereign Gold Bonds (SGB) | Weekly windows announced by RBI in its press release |
Domestic Deposits
III. Advances
Government Securities Market in India – A Primer
It is calculated as per the following formula
Foreign Investment in India
FAQs on Non-Banking Financial Companies
Classification of NBFCs into sub-groups
Indian Currency
C. Different Types of Bank Notes and Security Features of banknotes
The security features in MG Series 2005 and MG (New) Series banknotes are as under:
i. Security Thread: The silver coloured machine-readable security thread in ₹10, ₹20 and ₹50 denomination banknotes is windowed on front side and fully embedded on reverse side. The thread fluoresces in yellow on both sides under ultraviolet light. The thread appears as a continuous line from behind when held up against light. ₹100 and above denomination banknotes have machine-readable windowed security thread with colour shift from green to blue when viewed from different angles. It fluoresces in yellow on the reverse and the text will fluoresce on the obverse under ultraviolet light.
ii. Intaglio Printing: The portrait of Mahatma Gandhi, Reserve Bank seal, Guarantee and promise clause, Ashoka Pillar emblem, RBI’s Governor's signature and the identification mark for the visually impaired persons are printed in intaglio in denominations ₹100 and above.
iii. See through register: On the left side of the note, a part of the numeral of each denomination is printed on the obverse (front) and the other part on the reverse. The accurate back to back registration makes the numeral appear as one when viewed against light.
iv. Water Mark and electrotype watermark: The banknotes contain the portrait of Mahatma Gandhi in the watermark window with a light and shade effect and multi-directional lines. An electrotype mark showing the denominational numeral in each denomination banknote also appears in the watermark widow and these can be viewed better when the banknote is held against light.
v. Colour Shifting Ink: The numeral 200, 500 & 2000 on the ₹200, ₹500 and ₹2000 banknotes are printed in a colour-shifting ink. The colour of these numerals appears green when the banknotes are held flat but would change to blue when the banknotes are held at an angle.
vi. Fluorescence: The number panels of the banknotes are printed in fluorescent ink. The banknotes also have dual coloured optical fibres. Both can be seen when the banknotes are exposed to ultra-violet lamp.
vii. Latent Image: In the banknotes of ₹20 and above in the MG-2005 Series, the vertical band next to the (right side) Mahatma Gandhi’s portrait contains a latent image, showing the denominational value as the case may be. The value can be seen only when the banknote is held horizontally and light allowed to fall on it; otherwise this feature appears only as a vertical band. In the MG (New) Series banknotes, the latent image exists in denominations ₹100 and above.
viii. Micro letterings: This feature appears at different places on the banknotes and can be seen better under a magnifying glass.
ix. Additional Features introduced since 2015
• New Numbering Pattern
The numerals in both the number panels of the banknotes are in ascending size from left to right while the first three alpha-numeric characters (prefix) will remain constant in size.
• Angular Bleed Lines and Increase in the size of Identification Marks
Angular Bleed Lines have been introduced in banknotes - 4 lines in 2 blocks in ₹100, 4 angular bleed lines with two circles in between in ₹200, 5 lines in 3 blocks in ₹500, 7 in ₹2000. In addition, the size of the identification marks in denominations ₹100 and above have been increased by 50 percent.
Information about the above security features present in the Indian banknotes denomination-wise is also available on the website www.rbi.org.in>>press releases. Alternately, information can also be accessed from /en/web/rbi/-/notifications/master-circular-detection-and-impounding-of-counterfeit-notes-11610
Core Investment Companies
Core Investment Companies (CICs)
Ans: CICs need not meet the principal business criteria for NBFCs.
External Commercial Borrowings (ECB) and Trade Credits
G. END-USES
All you wanted to know about NBFCs
B. Entities Regulated by RBI and applicable regulations
Annual Return on Foreign Liabilities and Assets (FLA) under FEMA 1999
Some Useful Definitions
Ans: Participating preference shares are those shares which have one or more of the following rights:
(a) To receive dividend, out of surplus profit after paying the dividend to equity shareholders.
(b) To have share in surplus assets remaining after the entire capital is paid in case of winding up of the company.
On the other hand, non-participating preference shares are those shares which do not have any of the above said rights.
Retail Direct Scheme
Investment and Account holdings related queries
G-Secs are credit risk free instruments in domestic currency. However, there are market risks if you sell before maturity. You may refer to ‘Government Securities Market- A primer’, published on RBI website, to understand various risks associated with government securities.
Government Securities Market in India – A Primer
27.1 Duration (also known as Macaulay Duration) of a bond is a measure of the time taken to recover the initial investment in present value terms. In simplest form, duration refers to the payback period of a bond to break even, i.e., the time taken for a bond to repay its own purchase price. Duration is expressed in number of years. A step by step approach for working out duration is given in the Box IV below.
| Calculation for Duration First, each of the future cash flows is discounted to its respective present value for each period. Since the coupons are paid out every six months, a single period is equal to six months and a bond with two years maturity will have four time periods. Second, the present values of future cash flows are multiplied with their respective time periods (these are the weights). That is the PV of the first coupon is multiplied by 1, PV of second coupon by 2 and so on. Third, the above weighted PVs of all cash flows is added and the sum is divided by the current price (total of the PVs in step 1) of the bond. The resultant value is the duration in no. of periods. Since one period equals to six months, to get the duration in no. of year, divide it by two. This is the time period within which the bond is expected to pay back its own value if held till maturity. Illustration: Taking a bond having 2 years maturity, and 10% coupon, and current price of ₹101.79, the cash flows will be (prevailing 2 year yield being 9%):
Duration in number of periods = 379.28/101.79 = 3.73 Duration in years = 3.73/2 = 1.86 years |
More formally, duration refers to:
-
The weighted average term (time from now to payment) of a bond's cash flows or of any series of linked cash flows.
-
The higher the coupon rate of a bond, the shorter the duration (if the term of the bond is kept constant).
-
Duration is always less than or equal to the overall life (to maturity) of the bond.
-
Only a zero coupon bond (a bond with no coupons) will have duration equal to its maturity.
What is Modified Duration?
27.2 Modified duration (MD) is a modified version of Macaulay Duration. It refers to the change in value of the security to one per cent change in interest rates (Yield). The formula is
Illustration
In the above example given in Box IV, MD = 1.86/(1+0.09/2) = 1.78
Duration is useful primarily as a measure of the sensitivity of a bond's market price to interest rate (i.e., yield) movements. It is approximately equal to the percentage change in price for one percent change in yield. For example the duration is the approximate percentage by which the value of the bond will fall for a 1% per annum increase in market interest rate. So, a 15-year bond with a duration of 7 years would fall approximately 7% in value if the interest rate increased by 1% per annum. In other words, duration is the elasticity of the bond's price with respect to interest rates. This ignores convexity explained in para 24.7
What is PV 01?
27.3 PV01 describes the actual change in price of a bond if the yield changes by one basis point (equal to one hundredth of a percentage point). It is the present value impact of 1 basis point (0.01%) (1%=100 bps) movement in interest rate. It is often used as a price alternative to duration (a time measure). Higher the PV01, the higher would be the volatility (sensitivity of price to change in yield).
Illustration
From the modified duration (given in the illustration under 27.2), we know that the security value will change by 1.78% for a change of 100 basis point (1%) change in the yield. In value terms that is equal to 1.78*(101.79/100) = ₹ 1.81.
Hence the PV01 = 1.81/100 = ₹0.018, which is 1.8 paise. Thus, if the yield of a bond with a Modified Duration of 1.78 years moves from say 9% to 9.05% (5 basis points), the price of the bond moves from ₹101.79 to ₹101.70 (reduction of 9 paise, i.e., 5x1.8 paise).
What is Convexity?
27.4 Calculation of change in price for change in yields based on duration works only for small changes in yields. This is because the relationship between bond price and yield is not strictly linear. Over large variations in yields, the relationship is curvilinear i.e., the reduction in option free bond price is less than the change calculated based only on duration for yield increase, and increase in option free bond price will be more than the change calculated based only on duration for yield decrease. This is measured by a concept called convexity, which is the change in duration of a bond due to change in the yield of the bond.
Foreign Investment in India
Domestic Deposits
III. Advances
An illustrative list of Intermediary Agencies is as under;
-
State Sponsored organizations for on-lending to Weaker Sections@
-
Distributors of agricultural inputs/ implements.
-
State Financial Corporations (SFCs)/ State Industrial Development Corporations (SIDCs) to the extent they provide credit to weaker sections.
-
National Small Industries Corporation (NSIC).
-
Khadi and Village Industries Commission (KVIC)
-
Agencies involved in assisting the decentralized sector.
-
Housing and Urban Development Corporation Ltd. (HUDCO)
-
Housing Finance Companies approved by National Housing Bank (NHB) for refinance.
-
State sponsored organization for SCs/STs (for purchase and supply of inputs to and/or marketing of output of the beneficiaries of these organizations).
-
Micro Finance Institutions/ Non-Government Organizations (NGOs) on lending to SHGs.
@ ‘Weaker Sections’ in Priority Sector includes following:
-
Small and marginal farmers with land holdings of 5 acres and less, landless labourers, tenant farmers and share-croppers;
-
Artisans, village and cottage industries where individual credit requirements do not exceed Rs.25,000/-.
-
Small and marginal farmers, sharecroppers, agricultural and non-agricultural labourers, rural artisans and families living below the poverty lines are the beneficiaries. The family income should not exceed Rs.11,000/- per annum.
-
Scheduled Castes and Scheduled Tribes.
-
Beneficiaries are persons whose family income from all sources does not exceed Rs.7200/- per annum in urban or semi urban areas or Rs.6400/- per annum in rural areas. They should not own any land or the size of their holding does not exceed one acre in the case of irrigated land and 2.5 acres in the case of unirrigated land (land holding criteria do not apply to SC/ST).
-
Beneficiaries under Scheme of Liberation and Rehabilitation of Scavengers (SLRs).
-
Advances granted to Self-Help Groups (SHGs) for reaching the rural poor.
FAQs on Non-Banking Financial Companies
Time frame for compliance of regulations
Indian Currency
C. Different Types of Bank Notes and Security Features of banknotes
In addition to the security features listed above, banknotes issued after introduction of MG series-2005 have the year of printing on the reverse of the banknotes which is not present in the pre-2005 series.
Core Investment Companies
Core Investment Companies (CICs)
Ans: A holding company not meeting the criteria for a CIC laid down in para 2 of Notification No DNBS. (PD) 219/CGM(US)-2011 dated January 5, 2011 would require to register as an NBFC. However, if such company wishes to register as CIC-ND-SI/ be exempted as CIC, it would have to apply to RBI with an action plan achievable within the specific period to reorganize its business as CIC. If it is not able to do so, it would need to comply with NBFC requirements and prudential norms.
External Commercial Borrowings (ECB) and Trade Credits
G. END-USES
All you wanted to know about NBFCs
B. Entities Regulated by RBI and applicable regulations
Retail Direct Scheme
Investment and Account holdings related queries
The returns on Government securities are dependent on various features of the securities. You may refer to ‘Government Securities Market- A primer’, published on RBI website, to understand the factors affecting the returns on government securities.
Domestic Deposits
III. Advances
Yes. The banks are free to determine the rates of interest without reference to BPLR and regardless of the size, in respect of following loans:
(i) a. Loans for purchase of consumer durables.
b. Loans to individuals against shares and debentures/ bonds
c. Other non-priority sector personal loans.
d. Advances/ overdrafts against domestic/ NRE/ FCNR(B) deposits with the bank, provided that the deposit/s stands/ stand either in the name(s) of the borrower himself/ borrowers themselves, or in the names of the borrower jointly with another person.
e. Finance granted to intermediary agencies (excluding those of housing) for on lending to ultimate beneficiaries and agencies providing input support.
f. Finance granted to housing finance intermediary agencies for on lending to ultimate beneficiaries
g. Discounting of Bills
h. Loans/Advances/Cash Credit/Overdrafts against commodities subject to Selective Credit Control
ii. Loans covered by participation in interest refinancing schemes of term lending institutions. | Banks are free to charge rates as per stipulations of the refinancing agencies without reference to BPLR |
Government Securities Market in India – A Primer
28.1 For Cooperative banks, investments classified under 'Held to Maturity' (HTM) category need not be marked to market and will be carried at acquisition cost unless it is more than the face value, in which case the premium should be amortized over the period remaining to maturity. The individual scrip in the ‘Available for Sale’ (AFS) category in the books of the cooperative banks will be marked to market at the year-end or at more frequent intervals. The individual scrip in the ‘Held for Trading’ (HFT) category will be marked to market at monthly or at more frequent intervals. The book value of individual securities in AFS and HFT categories would not undergo any change after marking to market.
28.2 RBI vide FMRD.DIRD.7/14.03.025/2017-18 dated March 31, 2018 has notified that Financial Benchmark India Pvt. Ltd (FBIL) has been advised to assume the responsibility for administering valuation of Government securities with effect from March 31, 2018. From this date, FIMMDA has ceased to publish prices/yield of Government securities and this role has been taken over by FBIL. FBIL had commenced publication of the G-Sec and SDL valuation benchmarks based on the extant methodology. Going forward, FBIL will undertake a comprehensive review of the valuation methodology. RBI regulated entities, including banks, non-bank financial companies, Primary Dealers, Co-Operative banks and All India Financial Institutions who are required to value Government securities using prices published by FIMMDA as per previous directions may use FBIL prices with effect from March 31, 2018. Other market participants who have been using Govt. securities prices/yields published by FIMMDA may use the prices/yields published by FBIL for valuation of their investment portfolio.
28.3 State Development Loans were previously valued by applying YTM method by marking it up by a spread of 25 basis points on the Central G-Sec yield of the corresponding residual maturity, whereas for corporate bonds the spreads given by the FIMMDA need to be added. RBI vide its notification DBR.BP.BC.No.002 /21.04.141/2018-19 dated July 27, 2018 decided that securities issued by each state government, i.e., State Development Loans (SDLs), shall be valued in a manner which would objectively reflect their fair value based on observed prices/yields and Financial Benchmarks India Pvt. Ltd. (FBIL) shall make available prices for valuation of SDLs based on the above principles. Brief details of valuation methodology is provided in Box V.
| A framework in this regard has been formulated by FBIL having the following elements: (a) On any business day, the secondary market prices/YTM of SDLs and the auction prices/YTM of SDLs, as available, will be used for their valuation. However, the secondary market trades that are referred to the Dispute Resolution Committee (DRC) of the Fixed Income Money Market and Derivatives Association of India (FIMMDA) and the reversed trades when they occur, will be excluded, (b) Interpolation/ extrapolation technique will be used in respect of the remaining SDLs which do not trade on that day, and (c) Consistency/market alignment check, as applicable, will be applied in respect of all traded prices/YTM. The methodology seeks to strike a judicious and prudent balance between two opposing considerations: Since the number of actual/observed prices in respect of SDLs are very small, the opportunity cost of not including any actual/observed price is high (consequence of the so-called Type 1 error). However, sufficient care has been exercised, by way of the imposition of a set of objective criteria, to make sure that (i) off-market data are excluded, and (ii) no incentive for market manipulation is provided (reducing the possibility of the so called Type 2 error). The detailed valuation methodology along with illustrations is provided on FBIL website at link https://www.fbil.org.in/uploads/general/FBIL-SDL_Valuation_Methodology.pdf |
28.4 In the case of corporate bonds, the spread that need to be added to the corresponding yield on central G-Sec will be published by the FIMMDA from time to time. FIMMDA gives out the information on corporate bond spreads for various ratings of bonds. While valuing a bond, the appropriate spread has to be added to the corresponding CG yield and the bond has to be valued using the standard ‘Price’ formula.
Foreign Investment in India
Annual Return on Foreign Liabilities and Assets (FLA) under FEMA 1999
Some Useful Definitions
Ans: If the Indian entity has issued the shares to non-resident entities under the FDI scheme in India, then it is a FDI and should be reported under the Foreign Direct Investment in India (Liabilities) of the return.
FAQs on Non-Banking Financial Companies
Credit Rating
- The NBFCs in the category of equipment leasing and hire purchase finance companies having Rating of less than the Investment Grade as mentioned below are no longer entitled to accept fresh public deposits :
Name of rating agencies | Level of minimum investment |
EL/HP Cos. | LC/ICs |
CRISIL | A- (A MINUS) |
ICRA | A- (A MINUS) |
CARE | BBB (FD) |
DCR India | BBB- (BBB minus) |
The Loan and Investment Companies having Rating of less than `A are no longer entitled to accept fresh deposits.
It may be added that A- is not equivalent to A; AA- is not equivalent to AA and AAA- is not equivalent to AAA.
Indian Currency
C. Different Types of Bank Notes and Security Features of banknotes
The Mahatma Gandhi (New) Series banknotes have a sharp colour contrast scheme to facilitate identification by the partially visually challenged. The banknotes from ₹100 denomination onwards, have angular bleed lines (4 lines in 2 blocks in ₹100, 4 angular bleed lines with two circles in between in ₹200, 5 lines in 3 blocks in ₹500, 7 in ₹ 2000) and identification mark for the benefit of the visually challenged. There is an identification mark on the front side of each note which is in raised print (intaglio) and has different shapes for different denominations for e.g. Horizontal rectangle for ₹2000, circle for ₹500, raised Identification mark H for ₹200, triangle for ₹100. Further, in these denominations numerals are prominently displayed in the central area of the notes in raised print.
Core Investment Companies
Core Investment Companies (CICs)
Ans: No, since the Company is not fulfilling the Principal Business Criteria (asset-income pattern) of an NBFC i.e. more than 50 % of its total assets should be financial assets and the income derived from these assets should be more than 50% of the gross income, it is not required to register as an NBFC under Section 45 IA of the RBI Act, 1934. However it should register itself as an NBFC as soon as it fulfills the criteria of an NBFC and comply with the NBFC norms.
External Commercial Borrowings (ECB) and Trade Credits
G. END-USES
All you wanted to know about NBFCs
B. Entities Regulated by RBI and applicable regulations
Retail Direct Scheme
Investment and Account holdings related queries
| S. No. | Government security | Minimum investment amount/quantity (as on Nov 12, 2021) |
| 1 | Government of India Treasury Bills (T-Bills) | ₹10,000 |
| 2 | Government of India dated securities (dated G-Sec) | ₹10,000 |
| 3 | State Development Loans (SDLs) | ₹10,000 |
| 4 | Sovereign Gold Bonds (SGB) | One gram of gold |
Domestic Deposits
III. Advances
Annual Return on Foreign Liabilities and Assets (FLA) under FEMA 1999
Some Useful Definitions
Ans: Under FLA return, calculation of market value of equity capital for unlisted companies is done using the Own Funds at Book Value (OFVB) method, in accordance with IMF’s guidelines under the compilation of CDIS data for a country. It is calculated as follows:
Market value of equity capital held by Non- resident at OFBV for current year/previous year
= (Net worth of the company for current year/previous year) * (% non-resident equity holding for current year/previous year)
where, Net worth of the company
= (Paid up Equity & Participating Preference share capital of company + Reserves & Surplus - Accumulated losses)
Foreign Investment in India
FAQs on Non-Banking Financial Companies
Credit Rating
Indian Currency
C. Different Types of Bank Notes and Security Features of banknotes
Mobile Aided Note Identifier (MANI) is a mobile application launched by the Reserve Bank for aiding visually impaired persons to identify the denomination of Indian Banknotes. The free of cost application, once installed, does not require internet and is capable of identifying the denominations of Mahatma Gandhi Series and Mahatma Gandhi (New) series banknote by checking front or reverse side/part of the note including half folded notes at various holding angles and in a broad range of light conditions (normal light/day light/low light etc).
Note: This mobile application does not authenticate a note as being either genuine or counterfeit.
Government Securities Market in India – A Primer
G-Secs are generally referred to as risk free instruments as sovereigns rarely default on their payments. However, as is the case with any financial instrument, there are risks associated with holding the G-Secs. Hence, it is important to identify and understand such risks and take appropriate measures for mitigation of the same. The following are the major risks associated with holding G-Secs:
29.1 Market risk – Market risk arises out of adverse movement of prices of the securities due to changes in interest rates. This will result in valuation losses on marking to market or realizing a loss if the securities are sold at adverse prices. Small investors, to some extent, can mitigate market risk by holding the bonds till maturity so that they can realize the yield at which the securities were actually bought.
29.2 Reinvestment risk – Cash flows on a G-Sec includes a coupon every half year and repayment of principal at maturity. These cash flows need to be reinvested whenever they are paid. Hence there is a risk that the investor may not be able to reinvest these proceeds at yield prevalent at the time of making investment due to decrease in interest rates prevailing at the time of receipt of cash flows by investors.
29.3 Liquidity risk – Liquidity in G-Secs is referred to as the ease with which security can be bought and sold i.e. availability of buy-sell quotes with narrow spreads. Liquidity risk refers to the inability of an investor to liquidate (sell) his holdings due to non-availability of buyers for the security, i.e., no trading activity in that particular security or circumstances resulting in distressed sale (selling at a much lower price than its holding cost) causing loss to the seller. Usually, when a liquid bond of fixed maturity is bought, its tenor gets reduced due to time decay. For example, a 10-year security will become 8 year security after 2 years due to which it may become illiquid. The bonds also become illiquid when there are no frequent reissuances by the issuer (RBI) in those bonds. Bonds are generally reissued till a sizeable amount becomes outstanding under that bond. However, issuer and sovereign have to ensure that there is no excess burden on Government at the time of maturity of the bond as very large amount maturing on a single day may affect the fiscal position of Government. Hence, reissuances for securities are generally stopped after outstanding under that bond touches a particular limit. Due to illiquidity, the investor may need to sell at adverse prices in case of urgent funds requirement. However, in such cases, eligible investors can participate in market repo and borrow the money against the collateral of such securities.
Risk Mitigation
29.4 Holding securities till maturity could be a strategy through which one could avoid market risk. Rebalancing the portfolio wherein the securities are sold once they become short term and new securities of longer tenor are bought could be followed to manage the portfolio risk. However, rebalancing involves transaction and other costs and hence needs to be used judiciously. Market risk and reinvestment risk could also be managed through Asset Liability Management (ALM) by matching the cash flows with liabilities. ALM could also be undertaken by matching the duration of the assets and liabilities.
Advanced risk management techniques involve use of derivatives like Interest Rate Swaps (IRS) through which the nature of cash flows could be altered. However, these are complex instruments requiring advanced level of expertise for proper understanding. Adequate caution, therefore, need to be observed for undertaking the derivatives transactions and such transactions should be undertaken only after having complete understanding of the associated risks and complexities.
Core Investment Companies
Core Investment Companies (CICs)
Ans: The company would have to apply for COR to RBI, giving a business plan within a prescribed time period of one year in which it would achieve CIC-ND-SI status. In case the company is unable to do so, the exemptions would not apply and the company would have to comply with NBFC capital adequacy and exposure norms.
External Commercial Borrowings (ECB) and Trade Credits
G. END-USES
All you wanted to know about NBFCs
B. Entities Regulated by RBI and applicable regulations
Annual Return on Foreign Liabilities and Assets (FLA) under FEMA 1999
Some Useful Definitions
Ans: If the Indian reporting entity is listed, then their closing share price as on reference period, i.e., end-March of previous and current year is used for valuation of non-resident equity investment.
Retail Direct Scheme
Investment and Account holdings related queries
For dated G-Sec, T-Bills and SDLs – The following limits apply if you purchase these securities through the non-competitive segment of primary auctions:
| S. No. | Government security | Maximum investment amount/quantity (as on Nov 12, 2021) |
| 1 | Government of India Treasury Bills (T-Bills) | The aggregate allocation of all non-competitive bids will be restricted to a maximum of 5% of the aggregate nominal amount of the issue within the notified amount as specified by the Government of India, or any other percentage determined by RBI. |
| 2 | Government of India dated securities (dated G-Sec) | ₹2 crore (face value) per security per auction. |
| 3 | State Development Loans (SDLs) | 1% of notified amount (face value) per auction |
For Sovereign Gold Bonds (SGBs) – An individual may not subscribe to more than 4 kg of SGBs per fiscal year. The annual ceiling will include bonds subscribed under different tranches during initial issuance by Government and those purchased from the Secondary Market.
Government Securities Market in India – A Primer
30.1 While the G-Secs market generally caters to the investors with a long-term investment horizon, the money market provides investment avenues of short term tenor. Money market transactions are generally used for funding the transactions in other markets including G-Secs market and meeting short term liquidity mismatches. By definition, money market is for a maximum tenor of one year. Within the one year, depending upon the tenors, money market is classified into:
i. Overnight market - The tenor of transactions is one working day.
ii. Notice money market – The tenor of the transactions is from 2 days to 14 days.
iii. Term money market – The tenor of the transactions is from 15 days to one year.
What are the different money market instruments?
30.2 Money market instruments include call money, repos, T- Bills (for details refer para 1.3), Cash Management Bills (for details refer para 1.4), Commercial Paper, Certificate of Deposit and Collateralized Borrowing and Lending Obligations (CBLO).
Call money market
30.3 Call money market is a market for uncollateralized lending and borrowing of funds. This market is predominantly overnight and is open for participation only to scheduled commercial banks and the primary dealers.
Repo market
30.4 Repo or ready forward contact is an instrument for borrowing funds by selling securities with an agreement to repurchase the said securities on a mutually agreed future date at an agreed price which includes interest for the funds borrowed.
30.5 The reverse of the repo transaction is called ‘reverse repo’ which is lending of funds against buying of securities with an agreement to resell the said securities on a mutually agreed future date at an agreed price which includes interest for the funds lent.
30.6 It can be seen from the definition above that there are two legs to the same transaction in a repo/ reverse repo. The duration between the two legs is called the ‘repo period’. Predominantly, repos are undertaken on overnight basis, i.e., for one day period. Settlement of repo transactions happens along with the outright trades in G-Secs.
30.7 The consideration amount in the first leg of the repo transactions is the amount borrowed by the seller of the security. On this, interest at the agreed ‘repo rate’ is calculated and paid along with the consideration amount of the second leg of the transaction when the borrower buys back the security. The overall effect of the repo transaction would be borrowing of funds backed by the collateral of G-Secs.
30.8 The repo market is regulated by the Reserve Bank of India. All the above mentioned repo market transactions should be traded/reported on the electronic platform called the Clearcorp Repo Order Matching System (CROMS).
30.9 As part of the measures to develop the corporate debt market, RBI has permitted select entities (scheduled commercial banks excluding RRBs and LABs, PDs, all-India FIs, NBFCs, mutual funds, housing finance companies, insurance companies) to undertake repo in corporate debt securities. This is similar to repo in G-Secs except that corporate debt securities are used as collateral for borrowing funds. Only listed corporate debt securities that are rated ‘AA’ or above by the rating agencies are eligible to be used for repo. Commercial paper, certificate of deposit, non-convertible debentures of original maturity less than one year are not eligible for this purpose. These transactions take place in the OTC market and are required to be reported on FIMMDA platform within 15 minutes of the trade for dissemination of trade information. They are also to be reported on the clearing house of any of the exchanges for the purpose of clearing and settlement.
Triparty Repo
"Tri-party repo" means a repo contract where a third entity (apart from the borrower and lender), called a Tri-Party Agent, acts as an intermediary between the two parties to the repo to facilitate services like collateral selection, payment and settlement, custody and management during the life of the transaction. Funds borrowed under repo including tri-party repo in government securities shall be exempted from CRR/SLR computation and the security acquired under repo shall be eligible for SLR provided the security is primarily eligible for SLR as per the provisions of the Act under which it is required to be maintained.
Tri Party Repo Dealing System (TREPS) facilitates, borrowing and lending of funds, in Triparty Repo arrangement. CCIL is the Central Counterparty to all trades from TREPS and also perform the role and responsibilities of Triparty Repo Agent. All the repo eligible entities are entitled to participate in Triparty Repo. The entity type admitted include, Public Sector Banks, Private Banks, Foreign Banks, Co-operative Banks, Financial Institutions, Insurance Companies, Mutual Funds, Primary Dealers, Bank cum Primary Dealers, NBFCs, Corporates, Provident/ Pension Funds, Payment Banks, Small Finance Banks, etc.
TREPS Dealing System is an anonymous order matching System provided by CCDS (Clearcorp Dealing Systems (India) Ltd) to enable Members to borrow and lend funds. It also disseminates online information regarding deals concluded, volumes, rate etc., and such other notifications as relevant to borrowing and lending under Triparty Repo by the members. The borrowing and/ or lending can be done for settlement type T+0 and T+1.
Commercial Paper (CP)
30.13 Commercial Paper (CP) is an unsecured money market instrument issued in the form of a promissory note and held in a dematerialized form through any of the depositories approved by and registered with SEBI. A CP is issued in minimum denomination of ₹5 lakh and multiples thereof and shall be issued at a discount to face value No issuer shall have the issue of CP underwritten or co-accepted and options (call/put) are not permitted on a CP. Companies, including NBFCs and AIFIs, other entities like co-operative societies, government entities, trusts, limited liability partnerships and any other body corporate having presence in India with net worth of ₹100 cr or higher and any other entities specifically permitted by RBI are eligible to issue Commercial papers subject to conditions specified by RBI. All residents, and non-residents permitted to invest in CPs under Foreign Exchange Management Act (FEMA), 1999 are eligible to invest in CPs; however, no person can invest in CPs issued by related parties either in the primary or secondary market. Investment by regulated financial sector entities will be subject to such conditions as the concerned regulator may impose.
RBI has issued Reserve Bank Commercial Paper Directions 2017 - FMRD.DIRD.01/CGM (TRS) - 2017 dated August 10, 2017
Certificate of Deposit (CD)
30.14 Certificate of Deposit (CD) is a negotiable money market instrument and issued in dematerialised form or as a Usance Promissory Note, for funds deposited at a bank or other eligible financial institution for a specified time period. Banks can issue CDs for maturities from 7 days to one year whereas eligible FIs can issue for maturities from 1 year to 3 years.
Domestic Deposits
III. Advances
Foreign Investment in India
FAQs on Non-Banking Financial Companies
Credit Rating
भारतीय रिझर्व्ह बँक मोबाईल ॲप्लिकेशन इंस्टॉल करा आणि नवीनतम बातम्यांचा त्वरित ॲक्सेस मिळवा!
आमचे अॅप इंस्टॉल करण्यासाठी QR कोड स्कॅन करा.
पेज अंतिम अपडेट तारीख: null
